Water heater installation Rockville MD done right the first time

When your old tank starts leaking or your hot water runs out before your shower does, you need water heater installation Rockville MD homeowners can count on. We install Rheem, AO Smith, Navien, and Rinnai units in homes and businesses across Montgomery County. Our team handles the full job: removal, disposal, new connections, and code-compliant startup. You get hot water back the same day in most cases, with upfront pricing before we start.

Local Plumbing Rockville md team in rockville
  • Leaking tank
  • No hot water
  • Tankless upgrade
  • Written scope firstYou see the price before we start
  • Floor protectionDrop cloths go down before tools come out
  • Pressure testEvery repair is tested before we pack up
  • Parts on the truckCommon fittings and valves are stocked

What our water heater installation includes

Every install is different, but most jobs include the same core work. Here is what you get when we install a new water heater. If you need extras like a new gas line or a tankless conversion, we quote those upfront so there are no surprises.

  • New water heater unitWe supply Rheem, AO Smith, Bradford White, Navien, or Rinnai units depending on your fuel type and size. The price includes the heater itself, so you do not have to shop for one or haul it home.
  • Removal and disposalWe drain the old tank, disconnect it, and haul it away. You do not need to schedule a separate pickup or pay a disposal fee. We also clean up any sediment or water that spilled during removal.
  • New expansion tank and shut-off valveCode requires an expansion tank on closed systems, and a working shut-off valve makes future service easier. We install both as part of the job, along with new flexible supply lines if yours are corroded.
  • Permit and inspectionWe pull the Montgomery County permit and schedule the inspection. You get the paperwork for your records. This matters for insurance and resale. We do not skip this step to save time.
  • Testing and walkthroughWe fill the tank, bleed the lines, set the temperature to 120 degrees Fahrenheit, and test every hot tap. Then we show you the shut-off valve, the anode rod location, and how to flush the tank once a year.
Water Heater Installation
Tankless water heater installation in Rockville MD

Water heater installation for homes

We install tank and tankless water heaters in houses, townhomes, and condos across Rockville. Whether you need a 40-gallon swap or a tankless upgrade, we handle the removal, install, and cleanup.

  • Leaking tank replacement
  • Running out of hot water
  • Rusty or smelly hot water
  • Tankless upgrade for endless hot water

Water heater installation for businesses

We install commercial-grade water heaters for restaurants, salons, offices, and multi-family buildings. We work after hours to keep your business open and your tenants comfortable.

  • RestaurantsHigh-demand tanks for kitchens and dish stations
  • Salons75-gallon tanks for multiple washing stations
  • OfficesEfficient units for restrooms and break rooms
  • Multi-familyCommercial tanks for apartment buildings

What water heater installation Rockville MD really involves

Water heater installation Rockville MD is the process of removing your old unit, connecting a new tank or tankless heater to your home's water and gas or electrical lines, and bringing everything up to current Maryland plumbing code. It is not just swapping a tank. We drain the old unit, disconnect gas or power, inspect the shut-off valve and expansion tank, check for corrosion on the fittings, and make sure the new heater sits level and vents correctly. A standard 40- or 50-gallon tank swap takes three to five hours. Tankless conversions can run a full day because we upsize gas lines and run new venting.

Most Rockville homes were built between the 1950s and 1990s, and many still have the original 40-gallon tank in a basement or utility closet. When those units fail, they usually fail fast: a puddle at 6 a.m., no hot water before work, or a rusty stream from the tap. If you are searching for water heater installation near me Rockville MD because your tank is 10 to 12 years old, that is the right call. We also handle rockville md water heater replacement for homeowners who want to upgrade to a 50-gallon unit or switch to tankless before the old one quits.

We size the unit to your household, install it to code, and test every tap before we leave.

How our water heater installation process works

We keep the job simple and predictable. You get a call-ahead, a clear scope, and a clean workspace when we leave. Here is what to expect from the first phone call to the final test.

  1. Phone assessment

    Phone assessment

    We ask about your current unit, fuel type, household size, and whether you want to stay with a tank or switch to tankless. You get a ballpark range on the call and a firm quote after we see the space. Most calls take five to ten minutes.

  2. On-site inspection

    On-site inspection

    A technician checks the existing heater, venting, gas line size, water shut-off valve, and electrical connection if applicable. We measure the space and confirm whether a 50-gallon tank will fit or if a tankless unit needs a new vent run. You get a written scope before we start.

  3. Removal and disposal

    Removal and disposal

    We shut off the gas or power, drain the old tank with a hose to a safe drain, and disconnect the water lines. The old unit comes out, and we haul it away. We protect the floor with drop cloths and move anything fragile out of the way before we start cutting or soldering.

  4. New unit install

    New unit install

    We set the new heater, connect copper or PEX tubing, install a new expansion tank and shut-off valve, and solder or press all fittings. Gas connections get a drip leg and a leak test. Tankless installs include new venting and a gas line upgrade if the existing line is undersized.

  5. Testing and walkthrough

    Testing and walkthrough

    We fill the tank, bleed the lines, light the pilot or power up the unit, and set the temperature to 120 degrees Fahrenheit. You get a walkthrough of the shut-off valve, the anode rod location, and the maintenance schedule. We do not leave until you have hot water at every tap.

Tools and methods we use for water heater installation

  • Services in Rockville MD

    Pipe wrench and tube cutter

    Used to disconnect old water lines and cut copper or PEX tubing to size. A clean cut prevents leaks at the fitting and ensures a proper seal.

  • Services in Rockville MD

    Propane torch and soldering kit

    For soldering copper pipe connections on tank installs. We also carry a press tool for no-flame connections in tight spaces or where open flame is a risk.

  • Services in Rockville MD

    Leak detection equipment

    Used to check gas connections and water fittings after the install. We test every joint before we leave, so you do not find a drip a week later.

  • Services in Rockville MD

    Pipe camera inspection

    If we suspect a hidden leak or a corroded line behind a wall, we run a camera to see the problem without tearing out drywall. It saves time and money.

  • We show you the problem in Rockville MD

    Hydro jetting machine

    Not used on every install, but if your old heater sent sediment into your plumbing, we can jet the lines clear. It restores flow to faucets and showerheads.

  • Services in Rockville MD

    Drain snake and plunger

    For clearing clogs that show up after a water heater swap. Sediment can block aerators and drains. We clear them before we leave.

  • We test before we leave in Rockville MD

    Maryland Plumbing Code compliance

    We follow the current Maryland Plumbing Code and Montgomery County amendments for venting, T&P relief valves, expansion tanks, and gas line sizing. We pull the permit and meet the inspector on site. This protects you and ensures the install passes on the first try.

  • Local service team in Rockville MD

    Peak demand sizing

    We calculate your hot water demand based on bathrooms, family size, and appliances. A 40-gallon tank works for two people; a 50-gallon for four; a tankless unit for endless hot water. We do not guess. We size it right so you do not run out.

When to schedule water heater installation

  • Your tank is 10 to 12 years old and you are planning to sell the house next spring.

    We install a new 40- or 50-gallon tank and provide the permit and inspection paperwork. A new water heater is a selling point, and the buyer's inspector will not flag it as a risk. You get a clean inspection and a faster sale. The new unit adds value and removes a negotiation point.

  • You just bought a Rockville home and the water heater is from 2008.

    We inspect the tank, check the anode rod, and give you an honest read on remaining life. If it is near the end, we install a new unit before it fails. We also check the shut-off valve and expansion tank. You avoid a surprise leak in your first year of ownership. You also get a baseline for maintenance going forward.

  • Your family grew and the 40-gallon tank cannot keep up with morning showers.

    We calculate your peak demand and install a 50- or 75-gallon tank, or a tankless unit if you prefer endless hot water. We upsize the gas line if needed and run new venting for tankless. Everyone gets a hot shower. No more waiting 20 minutes between showers or running the dishwasher at midnight.

  • Your commercial property needs a new 75-gallon tank for a restaurant or salon.

    We install a commercial-grade Rheem or AO Smith unit, pull the permit, and coordinate with the health inspector if needed. We work after hours to avoid disrupting your business. You stay open and your customers have hot water. The new unit meets code and handles the higher demand of a commercial kitchen or salon.

How water heater installation works in Rockville

Rockville has a mix of housing stock, and that affects how we install water heaters. In older neighborhoods like Twinbrook and Lincoln Park, many homes have 40-gallon tanks in tight utility closets with galvanized pipe that needs replacing. In newer areas like King Farm and Fallsgrove, we see more tankless units and PEX tubing. The water in Montgomery County is moderately hard, which wears out anode rods faster than in some other areas. That is why we check the anode rod on every install and recommend a flush once a year. Winter brings frozen pipes and higher demand for same day water heater installation Rockville MD calls. Summer is slower, which is a good time to replace an aging tank before it fails. If you need a new water heater install Rockville Maryland, we know the local code requirements and the common issues in each neighborhood. We pull the permit and meet the inspector, so you do not have to.

  • TwinbrookMany homes here have original 40-gallon tanks in tight closets. We often replace galvanized pipe with copper or PEX during the install.
  • King FarmNewer construction with PEX tubing and sometimes tankless units. We carry Navien and Rinnai parts for same-day service.
  • Rockville Town CenterMix of condos and commercial buildings. We coordinate with property managers for after-hours installs to avoid disrupting tenants.
  • Woodley GardensMid-century homes with basements. We see a lot of 50-gallon tanks here and often add expansion tanks for closed systems.
  • FallsgroveLarger homes with three or more bathrooms. We size 75-gallon tanks or tankless units to keep up with demand.
  • Moderately hard water in Montgomery CountyHard water builds sediment faster, which shortens tank life and raises energy bills. We flush the tank and check the anode rod on every install. If your water is very hard, we can add a sediment filter.

From problem to finished result.

  • 12-year-old tank replaced in Twinbrook

    Before

    A 40-gallon tank from 2012 was leaking from the bottom and rusting the floor. The homeowner was mopping up water every morning and had no hot water by 7 a.m. The shut-off valve was frozen open.

    After

    We installed a new 50-gallon Rheem tank, replaced the shut-off valve and expansion tank, and replaced 6 feet of corroded galvanized pipe with copper. The job took four hours. Hot water was back by lunch, and the floor was dry.

    Flush the tank once a year to remove sediment. Check the anode rod every two years and replace it when it is more than half consumed. We left a reminder tag on the new unit.

  • Tankless upgrade in King Farm

    Before

    A family of five was running out of hot water with a 50-gallon tank. Morning showers were staggered, and the dishwasher ran at midnight. The gas line was undersized for a tankless unit.

    After

    We installed a Navien tankless unit, upsized the gas line from 1/2-inch to 3/4-inch, and ran new PVC venting through the side wall. The job took seven hours. Now two showers can run at once with no temperature drop.

    Descale the tankless unit once a year with white vinegar to remove mineral buildup. We showed the homeowner how to isolate the unit and run the flush. It takes about 45 minutes.

  • Commercial 75-gallon install in Rockville Town Center

    Before

    A salon with six washing stations had a 75-gallon tank that was 15 years old and leaking. The owner was losing hot water during peak appointments and worried about closing for repairs.

    After

    We installed a new commercial-grade AO Smith 75-gallon tank after hours. The job took five hours, and the salon opened on time the next morning. The new unit meets code and handles the higher demand of six stations.

    We set up a yearly service agreement to flush the tank and check the anode rod. The owner gets a reminder call before the appointment so they can schedule around clients.

Problems we solve with new water heater installation

Most people call us when something goes wrong. Here are the common problems we fix with a new install, and what happens if you wait too long.

  • Leaking tank flooding the basement

    Leaking tank flooding the basement

    We shut off the water, drain the tank, and install a new unit the same day. We also check for water damage and recommend a restoration company if needed. Most leaks stop the moment we disconnect the old tank. A leaking tank can dump 40 to 50 gallons on your floor, ruining drywall, carpet, and stored items. Mold can start within 24 to 48 hours.

  • Rusty or smelly hot water

    Rusty or smelly hot water

    We replace the tank and install a new anode rod. If your water is hard, we can add a sediment filter or recommend a water softener. You get clean, odor-free hot water the same day. Rust in hot water usually means the tank lining is failing. It will not improve, and the tank can start leaking without warning. Smelly water often means bacteria in the anode rod.

  • Running out of hot water too fast

    Running out of hot water too fast

    We size a new 50- or 75-gallon tank or a tankless unit based on your peak demand. If you have three bathrooms, a tankless unit rated for 8 to 10 gallons per minute keeps up with two showers at once. A 40-gallon tank in a four-person home runs out in 10 to 15 minutes of showering. That leads to cold showers, scheduling fights, and sometimes a bigger problem: a failing dip tube.

  • Popping or rumbling sounds

    Popping or rumbling sounds

    We flush the tank during the install and add a sediment filter if your water is hard. If the tank is over 10 years old, replacement is the better call. We haul the old unit away and install a new one with a fresh anode rod. Sediment builds up on the bottom of the tank and causes overheating. The popping is steam escaping through the sediment. It shortens the tank's life and raises your gas bill.

Hot water that keeps up, installed to code, with no mess left behind.

  • Lower monthly gas bills

    Modern tank water heaters carry higher Energy Factor ratings than units from 15 years ago. A new 50-gallon Rheem or AO Smith tank typically cuts water heating costs by 10 to 20 percent. If you switch to a Navien or Rinnai tankless, you only heat water when you turn on the tap, which saves more in smaller households.

  • Hot water that keeps up

    Running out of hot water mid-shower is a sizing problem, not a repair problem. We calculate your peak demand based on bathrooms, appliances, and family size, then recommend a 40-, 50-, or 75-gallon tank or a tankless unit rated for your flow. You get a system that matches your household, not a guess.

  • Code-compliant from day one

    Montgomery County Plumbing Code requires proper venting, a T&P relief valve, a drip leg on gas lines, and an expansion tank on closed systems. We pull the permit, install to code, and leave the paperwork with you. That matters when you sell the house or file an insurance claim after a leak.

  • Fewer emergency calls

    A tank that is 10 years old with rust in the water or popping sounds is a leak waiting to happen. Replacing it on your schedule costs less than a burst pipe at 2 a.m. We also install new shut-off valves and supply lines so the next repair is easier and faster.

Water heater installation cost in Rockville

Typical 2026 pricing in Rockville for a standard 40- or 50-gallon tank install runs $1,200 to $1,800, including the unit, labor, permit, and haul-away. Tankless installs range from $2,800 to $4,500 because they often need a new gas line and venting. The price depends on the size and type of unit, the condition of your existing plumbing, and whether we need to replace corroded pipes or valves. We give you a firm quote before we start, so you know exactly what you are paying.

What your estimate is based on

  • Tank vs. tanklessA standard tank is the lower-cost option. Tankless units cost more upfront but last longer and save on gas. If you plan to stay in your home for five or more years, tankless can pay for itself.
  • Unit sizeA 40-gallon tank costs less than a 75-gallon. If you have a large family or a big soaking tub, you may need the bigger unit. We size it based on your demand, not a guess.
  • Fuel typeGas and electric tanks are similar in price, but gas installs include a leak test and drip leg. If you are switching from electric to gas, the cost goes up because we need to run a gas line.
  • Existing plumbing conditionIf your shut-off valve is frozen, your expansion tank is missing, or your pipes are galvanized, we may need to replace them. We show you the problem and quote the fix before we start.
  • Permit and inspectionMontgomery County requires a permit for water heater replacement. The fee is included in our quote. We pull the permit and meet the inspector, so you do not have to.
  • Access and ventingA tight utility closet or a long vent run adds labor. If we need to run new venting for a tankless unit, that is an extra cost. We measure and quote it upfront.

$1,200 - $4,500 depending on unit type and scope A new water heater lasts 10 to 15 years for a tank and 20 for a tankless. Spread over that time, the cost is a few dollars a month. You get lower gas bills, reliable hot water, and a code-compliant install that protects your home's value.

What you receive

Clear records you can keep and share.

Written scope

Clear quote before we start

Permit and inspection

We pull it and meet the inspector

Clean workspace

Old unit hauled away, floor wiped

What to know before you replace your water heater

Most homeowners wait until the tank leaks, but you can plan ahead. Knowing the signs of failure and your options helps you avoid an emergency.

  • Signs of failure

    Rusty water, popping sounds, and moisture around the tank mean it is near the end. A tank that is 10 to 12 years old is on borrowed time.

  • Tank vs. tankless

    A tank stores hot water and costs less upfront. A tankless unit heats on demand, lasts longer, and saves space, but costs more to install.

  • Sizing matters

    A 40-gallon tank works for two people; a 50-gallon for four. If you have three bathrooms, consider a 75-gallon tank or a tankless unit.

What Rockville homeowners say about our water heater installs

  • Our 12-year-old tank started leaking on a Friday morning. I called at 8 a.m. and they had a new 50-gallon Rheem in by 2 p.m. The tech showed me the corroded shut-off valve before replacing it, and the price matched the quote. No mess left behind. Hot water was back before dinner.
    Dave R.Homeowner, Twinbrook
  • We switched from a tank to a Navien tankless unit. The crew ran a new gas line and venting, which took most of the day, but they explained every step. Our gas bill dropped about $18 a month, and we never run out of hot water with two teenagers in the house. Worth every penny.
    Priya S.Homeowner, King Farm
  • I manage a 12-unit building and needed a 75-gallon commercial tank replaced fast. They pulled the permit, coordinated with the inspector, and had it running in one day. The tenants never lost hot water for more than four hours. I use them for all my properties now.
    Mark T.Property Manager, Rockville Town Center

Frequently Asked Questions

Still wondering? +1 (831) 293-1204

Local service team

Get your water heater installation Rockville MD scheduled today

If your tank is leaking, rusting, or just not keeping up, call us. We give you a firm price over the phone, show up when we say we will, and leave you with hot water and a clean floor. Same-day and next-day slots are available.

Contact Plumbing Rockville

Call us at +18312931204 or email plumbingrockille@gmail.com. We answer live calls 24/7 for emergencies and schedule standard appointments Monday through Friday, 8 a.m. to 6 p.m. If you leave a message after hours, we call back first thing the next morning. For urgent problems, call and we will dispatch a technician.

Thanks. Your request is in and the team will follow up shortly.