Marked location
Leak spot marked with tape and photographed
Leak detection Rockville MD locates hidden water leaks behind walls, under slabs, and in underground lines before they cause structural damage. We use acoustic listening equipment, thermal imaging, and pressure isolation to find the source in one visit. If you see a spike in your WSSC water bill or a damp spot that keeps returning, call us. We serve homeowners and property managers across Montgomery County.
Every leak detection call includes a full diagnostic, a written report, and a flat-rate repair quote. We do not charge extra for the report or the follow-up call if you have questions after we leave.


We find hidden leaks in houses, townhomes, and condos across Rockville. Our tools locate the source without tearing up your floors or walls.
We work with property managers, landlords, and business owners to find leaks before they disrupt tenants or customers. We schedule around your hours.
Leak detection Rockville MD is a diagnostic plumbing service that uses acoustic listening, thermal imaging, and pressure isolation to find hidden water leaks without tearing into walls or breaking up concrete. We start by verifying the leak exists, then narrow the location to within a few inches. Most residential jobs take two to four hours from arrival to written report. We check copper pipe, PEX tubing, and galvanized pipe, plus fixtures, shut-off valves, and water heater connections.
Rockville homes built before 1980 often have original copper or galvanized pipe that develops pinhole leaks after decades of WSSC water exposure. Newer construction in King Farm and Fallsgrove can hide slab leaks under post-tension concrete. If you need water leak detection Rockville MD because your bill jumped from $80 to $220 in one quarter, we can isolate the cause. We also handle emergency leak detection Rockville MD calls when water is actively pooling.
We find the leak first, then fix it. No guesswork, no unnecessary demolition.
We follow a five-step diagnostic sequence on every call. You get a clear explanation at each stage and a written summary before we leave.

Picks up the sound of pressurized water escaping a pinhole or crack. We use it to narrow the leak location to within a few inches on slab and wall leaks.

Shows temperature differences caused by moisture. We use it to map the leak path across a floor or behind a wall without cutting into the surface.

A camera on a flexible reel that travels inside drain and sewer lines. We use it to see root intrusion, joint separation, and corrosion.

We pressurize the system and isolate zones to confirm the leak is on the supply or drain side. This step prevents wasted effort.

For hard-to-find leaks, we inject a harmless tracer gas and use a detector to pinpoint the escape point. Useful for underground lines and slab leaks.

Measures the moisture content of drywall, wood, and concrete. We use it to confirm the leak location and to document the extent of moisture for insurance claims.

We shut off every fixture and appliance, then pressurize the system with a gauge. If pressure drops, the leak is on the supply side. If it holds, the issue is on the drain side. This method prevents us from scanning the wrong part of the house.

We use listening discs and a microphone to pick up the sound of water escaping a pipe. The sound gets louder as we get closer. We mark the spot and confirm with a thermal camera or moisture meter.
We pressure-test the system and isolate the leak. Acoustic equipment finds the source, usually a slab leak or a leaking shut-off valve. We quote the repair the same day. You stop paying for wasted water and fix the leak before it damages the floor or foundation.
We use thermal imaging to map the moisture and trace it to the source. If it is a slab leak, we locate the exact spot and quote a reroute or spot repair. The floor dries out, the leak stops, and you avoid mold and structural damage.
We shut off the main and pressure-test each zone. Acoustic listening pinpoints the leak. We repair the line and test it before we leave. The sound stops, your water pressure returns to normal, and you avoid a burst pipe.
We run a full leak detection diagnostic, including pressure testing and camera inspection. You get a written report with photos and a repair quote. You know exactly what you are buying and can negotiate the repair cost into the sale.
Rockville's housing stock ranges from 1920s bungalows in Lincoln Park to 2010s townhomes in King Farm. That range changes how we approach leak detection. Older homes often have galvanized pipe that corrodes from the inside, creating pinhole leaks that are hard to see. Newer homes may have PEX tubing or copper under post-tension slabs, which requires a different scanning approach. WSSC water chemistry also plays a role: it is moderately hard and can scale copper over time. If you need water leak under slab Rockville MD located, we use thermal mapping and acoustic listening to find the spot without breaking concrete. We also know which neighborhoods have clay soil that shifts and stresses underground lines. That local knowledge saves time and reduces guesswork.
A homeowner in King Farm noticed a warm spot on the kitchen floor and a water bill that jumped from $90 to $260. The floor tile was starting to loosen. They called us for leak detection.
We used thermal imaging and acoustic equipment to locate a slab leak under the kitchen. We rerouted the line through the attic, which took one day. The floor dried out, the tile stayed in place, and the water bill dropped back to $95 the next month.
We recommended checking the water meter monthly for any unexplained movement. If the bill spikes again, call us before the floor shows damage.
A property manager in Rockville Town Center had a tenant complaining about a musty smell in a first-floor unit. The drywall was damp but there was no visible leak. We were called to find the source.
We used acoustic listening to find a pinhole leak in a copper pipe behind the shower wall. We made one 6-by-6-inch access hole, repaired the pipe, and patched the drywall. The job was done in one day. The tenant renewed their lease.
We suggested adding a water leak alarm under the sink and near the water heater. Early detection prevents small leaks from becoming mold problems.
A homeowner in Twinbrook heard water running at 2 a.m. and called our emergency line. A pipe in the crawlspace had burst during a freeze. Water was pooling under the house.
We arrived within an hour, shut off the main, and repaired the burst section of copper pipe. We pressure-tested the rest of the line and found two weak spots. We repaired those the next day. The total cost was $850, including the emergency call.
We recommended insulating the crawlspace pipes and leaving a slow drip on the coldest nights. That prevents the next freeze from bursting a line.
A hidden leak does not fix itself. It gets worse, costs more, and damages more. Here are the problems we solve for Rockville homeowners every week.

We pressure-test the system, isolate the leak, and use acoustic equipment to find the source. Most slab leaks are located within two hours. We then quote a repair that reroutes the line or fixes the section. You are paying for water that never reaches a fixture. A slab leak can waste 10,000 gallons per month and add $150 or more to your WSSC bill.

We use thermal imaging to map the moisture and trace it to the source. If it is a slab leak, we locate the exact spot and quote a repair. If it is a drain leak, we run a camera to confirm. Moisture under tile or carpet feeds mold and weakens the subfloor. By the time you see buckling, the repair can cost $3,000 or more.

We shut off the main and pressure-test each zone to isolate the leak. Acoustic listening pinpoints the spot. We repair the line and test it before we leave. This usually means a pressurized supply line is leaking. It will not stop on its own and can burst without warning.

We inspect the area with a moisture meter and thermal camera. If the leak is in a drain line, we run a camera. We find the source, repair it, and document the moisture readings for your records. A hidden leak in a wall or under a slab creates constant moisture. Mold can start in 48 hours and spread through framing.
A slab leak can waste 10,000 gallons per month. WSSC bills in Rockville jump from $80 to $300 before most homeowners notice. We find the source and give you a repair plan the same day, so you stop paying for water that never reaches a fixture.
Water under a slab or behind drywall weakens framing, loosens tile, and feeds mold. By the time you see buckling, the damage is often $3,000 or more. Professional leak detection Rockville MD catches it when repair is still a plumbing job, not a renovation.
Without leak detection equipment, plumbers cut open walls to hunt. We use pipe camera inspection and thermal imaging to mark the exact spot. That means one small access hole instead of three, and your kitchen stays usable during the repair.
Rockville sits on clay-heavy soil that shifts when saturated. A water leak under slab Rockville MD can undermine footings over a single wet season. Finding and fixing the leak early protects the most expensive part of your home from movement and cracking.
Leak detection pricing in Rockville depends on the complexity of the search. A single wall leak takes less time than mapping an entire slab. Typical 2026 pricing for residential leak detection ranges from $180 to $450. That covers the full diagnostic, including pressure testing, acoustic scanning, thermal imaging, and a written report. If you approve the repair, we credit a portion of the detection fee toward the work. We quote a flat rate before we start, so you know the number upfront.
What your estimate is based on
$180 - $450 for detection; repair quoted separately Finding the leak is the hard part. Once we know the location, the repair is straightforward. Our flat-rate quote means you approve the number before we start. No hourly surprises.
Clear records you can keep and share.
Leak spot marked with tape and photographed
Summary of findings and repair plan
Repair price before any work begins
Not every leak is visible. Some hide under slabs, behind walls, or in crawlspaces. Finding them early saves money and prevents damage.
Supply leaks run constantly and spike your water bill. Drain leaks only show when water is running. We test both to find the source.
Slab leaks happen when copper pipe under concrete corrodes or shifts. We can reroute the line through the attic or walls to avoid breaking the slab.
Pinhole leaks in copper pipe are common in older Rockville homes. They waste water and can cause mold. We find them with acoustic equipment.

Not sure if we cover your street? Call and ask. +1 (831) 293-1204
Most residential leak detection calls in Rockville run $180 to $450, depending on whether we are scanning a single wall or mapping an entire slab. The fee covers the full diagnostic, including pressure testing, acoustic scanning, and a written report. If you approve the repair, we credit a portion of the detection fee toward the work. Emergency calls after hours may carry a higher rate.
The clearest sign is a WSSC water bill that jumps 30 percent or more without a change in usage. Other indicators include a water meter that spins when every fixture is off, damp spots on floors or baseboards, musty odors, or the sound of running water when nothing is on. If you notice any of these, call for leak detection before the damage spreads.
Yes. We use acoustic listening equipment and thermal imaging to locate wall leaks without cutting drywall. The acoustic disc picks up the sound of pressurized water escaping a pinhole, and the thermal camera shows temperature differences from moisture. We mark the spot and make one small access hole for the repair, usually 6 by 6 inches.
Slab leaks in Rockville usually come from copper pipe corrosion, abrasive soil contact, or shifting clay soil that stresses the line. Homes built before 1980 with original copper are most vulnerable. WSSC water chemistry also plays a role over decades. Once we locate the leak, we can reroute the line through the attic or walls to avoid breaking the slab again.
If your water bill spiked or you hear water running when nothing is on, call us. We find the leak, explain the repair, and quote a flat rate before we start. Same-day appointments available across Rockville and Montgomery County.
Call us at +18312931204 or email plumbingrockille@gmail.com. We answer live calls 24/7 for emergencies and schedule standard appointments Monday through Friday, 8 a.m. to 6 p.m. If you leave a message after hours, we call back first thing the next morning. For urgent problems, call and we will dispatch a technician.